Blink WE-30C Скачать руководство пользователя | Manualshive

Страница: 5 / 63

background image

OM0001_L2_R_WM_USAv2.1

1

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Before using the

Blink

Electric Vehicl

e Supply Equipment (EVSE), hereafter called “charger” or

“charging system”, read all of these instructions, as well as the

WARNING

and

CAUTION

markings

in this document, on the charger, and on your vehicle.

Legend

WARNING:

Used when there is a risk of personal injury

WARNING:

RISK OF ELECTRIC SHOCK

– Used when there is a risk of electric shock

WARNING: RISK OF FIRE

– Used when there is a risk of fire

CAUTION:

Used when there is a risk of damage to the equipment

WARNING:

RISK OF ELECTRIC SHOCK

Basic precautions should always be followed when using electrical products, including the
following:

a. Read all the instructions before using this product.

b. This device should be supervised when used around children.

c. Do not put fingers into the electric vehicle connector.

d. Do not use this product if the flexible power cord or EV cable is frayed, has broken

insulation, or any other signs of damage.

e. Do not use this product if the enclosure or the EV connector is broken, cracked, open, or

show any other indications of damage.

f.

MODELS WE-30C GROUNDING INSTRUCTIONS:

(Cord-connected models) This

product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.

«
...
3
4
5
6
7
...
»

Содержание WE-30C
































































Отзывы:

Нет отзывов

Похожие инструкции для WE-30C

Бренд: PASCO Страницы: 2

Бренд: Smartech Страницы: 7

NauticBattery NA-12Li125BL

Бренд: UPOWER Ecoline Страницы: 5

Бренд: Hamlet Страницы: 2

Бренд: BASETech Страницы: 4

Бренд: Duramaxx Страницы: 140

Бренд: HEINE Страницы: 40

Бренд: Hama Страницы: 76

Any-Grid Series

Бренд: Phocos Страницы: 36

Бренд: PATONA Страницы: 44

Бренд: Bahco Страницы: 64

Бренд: Black & Decker Страницы: 72

Бренд: Apewell Страницы: 6

Interactive 2000 PowerCharger

Бренд: Anton/Bauer Страницы: 24

Бренд: Bossard Страницы: 16

Бренд: VOLTCRAFT Страницы: 8

Бренд: VOLTCRAFT Страницы: 80

Бренд: SolaX Power Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды