Blink Marine PKP-2400-LI, Руководство пользователя

Страница: 9 / 16

Via Montefeltro, 6 – 20156 Milano (MI) – Italy - 9 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com – info@blinkgroup.com
PKP-2400-LI_J1939_UM_REV1.0
13. Baud rate setting (6Fh)
This message is used to change the baud rate of the CAN bus. Connecting only one
keypad to the bus when changing the baud rate is recommended. If an invalid value is
chosen, then no change is done to the stored value.
Byte 0
04h Header bytes
Byte 1
1Bh
Byte 2
6Fh Set baud rate message
Byte 3
02h 500kbit/s
03h 250kbit/s
Byte 4,7 FFh Not used
14. Set Source Address (70h)
This message is used to change the keypad CAN Source Address and/or the Keypad
Identifier. Either or both the Source Address or Keypad Identifier may be changed
independently. Connecting only one keypad to the bus when changing the keypad address
is recommended. If an invalid value is chosen, then no change is done to the stored value.
Byte 0
04h Header bytes
Byte 1
1Bh
Byte 2
70h Set Address message
Byte 3
XXh XX: CAN Source Address
From 01h to FEh
FFh No change
Byte 4
YYh YY: Keypad Identifier
From 00h to FEh
FFh No change
Byte 5,7
FFh Not used
Example:
Direction Identifier Format Message Data
To
Keypad
18EF2100h Ext 04 1B 70 18 22 FF
FF FF Set Source Address =
18h,
Set Keypad identifier =
22h.
Example
Direction Identifier Format Message Data
To Keypad
18EF2100h Ext 04 1B 6F 02 FF FF FF
FF Set Baud rate at
500kbit/s