BrewCommander™
© Blichmann Engineering, LLC 2019
6
WIRING, CONNECTIONS, AND POWER REQUIREMENTS
Ignition Cable Port
– This port is used to connect the ignition module to the
Igniter installed on the burner. This connection must be made with a genuine
Blichmann Engineering
™
Ignition Cable or the BrewCommander
™
may
malfunction due to electromagnetic interference.
Power In
– This is the communication port between the BrewCommander
™
and the SparkBox
™
. The Brew Commander
™
will supply power to this port
when the burner is called to be lit. This signal needs to be 102-138VAC 50/60 Hz
and may draw up to 4 Amps.
Solenoid Power
– This receptacle is used to output power to the solenoid
when the burner is called to be lit, it must be wired directly to the solenoid by
the supplied 6ft solenoid cable.
Optional SparkBox™ Mounting Kit
Available is an optional SparkBox
™
mounting kit for mounting to the TOP Stand, TOP LTE Stand, and Top Tier Stand.
Power In
Ignition Cable Port
Solenoid Power
Installed
Sparkbox
™
Ground Clip
Wire
Installed
HellFire
™
Installed
Sparkbox
™
on Tower of Power™
Stand
Installed
Sparkbox
™
on Tower of Power™
LTE Stand
