background image

precautions to avoid prolonged exposure of extinguishing agent to high temperatures. After use of the system secure the area 
by natural or forced ventilation. Use the system only in permissible ways required by the manufacturer. 

 
BlazeCut Pressure Tube 

Unique BlazeCut Pressure Tube has both storage and detection function which means that the extinguishing agent is stored 
directly in the pressure tube. The pressure tube is made of special heat stabilized plastic resistant to most of alcohols, bases, 
water, ethers, ketones, hydrocarbons, mineral oils, standard fuels, salt solutions, organic acids. 
Always consult use of the system in application with presence of mineral acids, phenol and other aggressive chemicals with 
your supplier. 
Pressure tube is under constant pressure. Do not damage the tube,  do  not  puncture  or  throw.  During transportation secure 
against movement. During transfer do  not rub  against the  ground. Do not mend damaged tube. Do not store or  transport in 
vicinity of strong sources of heat, aggressive chemical substances (caustic, corrosive substances), prevent contact with sharp 
objects, vibrations or loading with other objects. Store in dry and well-ventilated rooms. Protect from sunlight. 
Always handle the pressure tube as if it were under pressure, unless it is directly verified that it is completely empty. 
 

Fittings 

The fittings of the tube close the tube and keep the system under pressure. The fitting is closed by a pressure gauge on one 
end and sealing screw or pressure switch on the other end. The pressure switch is fitted at the factory when ordered. 
Do not try to remove fittings of the tube if it is under pressure. Protect the fittings from corrosive substances during storage and 
transportation. 
 

Pressure Gauge 

Actual pressure in the system can be determined by reading the value on the pressure gauge, which is mounted on the fitting 
tube. Try to install the pressure gauge so that the pressure values can be read. 
 

Pressure Switch 

T Series 

models with the letter “S” in model designation have an integrated pressure switch that allows connection of signalling 

devices or to perform a shutdown operation at agent discharge. An IP65 Pressure Switch is factory fitted for outdoor and mobile 
applications. 
T Series models with the letters 

“S-E” in model designation have an integrated economy pressure switch that allows connection 

of signalling devices or to perform a shutdown operation at agent discharge. An IP54 economy pressure switch is factory fitted 
for indoor and fixed applications only. 
 
Where  there  are  high  risks  of  power  arcing,  BlazeCut  recommends  T  Series  to  be  installed  with  a  pressure  switch  on  all 
applications of 240 V and above, so that the application is immediately deenergized via the use of a T Series pressure switch 
model. 
 
If you have purchased a model with the pressure switch, please refer below in this User Manual or to the T Series Manual for 
more information about the pressure switch and its wiring. 

 

INSTALLATION INSTRUCTIONS 

 

If the BlazeCut T Series system is installed in the engine compartment, the system can be placed either 
on the engine hood or directly into the engine compartment (see figures below). To secure optimal fire 
suppression  effect,  it  is  necessary  to  determine  which  option  is  more  suitable  in  the  given  engine 
compartment. For example, if the engine is under a plastic cover, it is recommended to install the system 
directly into the engine compartment under the plastic cover. 

 

                       Installation on the hood          Installation into the engine compartment 

 

1.

 

The tube in the retail packaging is secured with cable ties. Cut off the cable ties carefully, avoiding damage to the tube. 
Dispose the silicone and plastic protectors used for packing purposes. 

 
2.

 

The  package  contains  high  temperature  cable  ties  for  installation  in  the  protected  enclosure.  It  is  possible  to  use  PVC 
dipped or rubber insulated metal clamps to prevent detachment of the tube in case of a fire. Do not use a steel fastening 
material  for  installation.  If  in  direct  contact,  steel  clamps,  steel  cable  ties  or  wire  will  cause  heat  concentrations  on  the 
pressure tube. This can result in a lower temperature/false actuations. 

Содержание T Series











Отзывы: