DISCLAIMER
The supplier or manufacturer shall not be liable for any damage. This directly relates to heath, life, property or
any monetary loss caused, due to failure to comply with instructions for installation, use, assembly,
maintenance, functional testing, safety, or any other instructions provided in this user manual.
SYSTEM OPERATION
Designed to protect small enclosed spaces with risks of fire. Simple and easy to install, the BlazeCut T Series
system operates automatically without any external power source. The extinguishing agent is stored in a tube,
which also applies the extinguishing agent directly to the fire at its source. When a fire occurs, the combination
of heat and internal pressure causes the tube to rupture, creating a nozzle, releasing the extinguishing agent.
WARNINGS AND CAUTIONS
Please ensure that the safety instructions are fully understood before the equipment is put
into service.
Do not modify any part of the BlazeCut components as this may void warranty, impair the
performance of this product and cause damage or serious injury.
Always wear the appropriate protective equipment and clothing whilst installing or servicing.
The BlazeCut T Series is designed as independently operating unit. It is not possible to
connect several independent systems into one unit.
The BlazeCut T Series is not compatible with other fire suppression systems, do not try to
connect the system to any other equipment.
The system may be installed only by adult persons, physically and mentally capable.
Incorrect interference with the system may cause malfunction of the system and provides
threat to safety and health of people.
The system is under constant pressure, any mechanical interference is prohibited.
Never unscrew the pressure gauge, the sealing screw or the pressure switch mounted on the
fittings.
Beware of any manipulation with the system if the system has been subjected to higher
temperatures. When the system is heated (e.g. during the operation of the device), the gas
pressure in the tube increases. If the pressure in the system is higher than 17 bar (247 psi)
the system is reaching burst pressure. In this case, the tube must not be mechanically
stressed. Release of a hot extinguishing agent under high pressure can cause serious injury.
Wait till the system cools down.
The BlazeCut fire system is a suppression system only and is not designed or intended to
extinguish all fires. Where there are high airflows and high accumulation of combustible
materials, this will dramatically alter the systems performance. Always consider
supplementary firefighting equipment be available in case system does not totally
extinguish a fire. For more information about the use of the system in an area occupied by
persons, please contact your supplier.
