PAGE 20
OM-9703
Date Printed: Thursday, July 05, 2007
Revision Date: March 6, 2006
FOR YOUR SAFETY - READ BEFORE LIGHTING
WARNING - If you do not follow these instructions exactly, a fire or explosion may result
causing property damage or personal injury.
A. This appliance has a pilot that is lit with a push button Piezo lighter. When lighting the pilot, follow these
instructions exactly.
B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because
some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
OPEN WINDOWS
DO NOT TOUCH ANY ELECTRIC SWITCH; DO NOT USE ANY PHONE IN YOUR BUILDING
EXTINGUISH ANY OPEN FLAME
IMMEDIATELY CALL YOUR GAS SUPPLIER FROM A NEIGHBOR'S PHONE AND FOLLOW THE
GAS SUPPLIER’S INSTRUCTIONS
IF YOU CANNOT REACH YOUR GAS SUPPLIER, CALL THE FIRE DEPARTMENT
C. Never use tools to turn or push any control knobs or switches.
If any controls on your appliance (knobs,
switches, buttons, dials) fail to move or operate properly do not force them. Excessive force or the use of tools
on these controls may damage them and could result in a fire or explosion.
If you have a problem do not try
to repair it. Call a qualified service technician.
D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to
inspect the appliance and replace any part of the control system or gas control which has been under water.
LIGHTING PREPARATION
WIRING DIAGRAM
CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING
CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION
Spark Electrode
RHEOSTAT
F
M
M
F
M
Green
Snap
Disc
M
M
F
F
F
AC Plug
M
F
FAN
White
Black
M
F
15”
15”
23”
Thermopile
Thermostat
Stove
On/Off
Switch
Valve:
See Page 19
TP
TH
TH/TP
F
F90
F90
F
L
200
M
F
M
F
12”
12”
23”
30”
M
F
