Blaupunkt TravelPilot RNS 150 US, Руководство по установке

Страница: 21 / 112

21
FRANÇAIS ENGLISH ESPAÑOL
Press << or >> on the rocker switch
7
.
The frequency will move up or down the band in increments of 200 kHz.
Selecting an AM radio stations
In AM radio operation, you can select stations both automatically and manually.
Automatic seek tuning
To select stations automatically,
Press on the rocker switch
7
to start seek tuning up or
on the rocker switch
7
to start seek tuning down.
The system will tune into the next available station.
Manual tuning
You can also select AM stations manually if you know their frequency. This is
useful if you would like to select a station which is not detected by automatic
seek tuning.
Press << or >> on the rocker switch
7
.
Scan/seek tuning
During Scan/seek tuning, the system searches through the entire band to find
radio stations within reception range. Each station found is played for ten sec-
onds. If you do not end the Scan/seek tuning function, it will end automatically
after it has run through the entire waveband once. Please note that, if the TA
function is active, only those stations which support traffic information will be
selected (TP symbol in the display). (European systems only)
Starting Scan/seek tuning
To start Scan/seek tuning,
Press TU
@
to switch to the Tuner function menu for the tuner and
Press the softkey marked SCAN.
Radio operation
Tuner function menu
2 RNS 150 gb 17.02.2000, 15:17 Uhr 21