Blaupunkt TravelPilot RNS 150 US, Руководство по установке

Страница: 103 / 112

Quick Tips Bosch page 20
TravelPilot page 21
April 27, 2000
Optional CD Changer
CD Changer
CD Changer
Always check the Owner’s Guide for more operating information and safety features
Accessing CD Function Menu
This menu enables, using softkeys,
the selection of random play, scan,
repeat, programming, naming
and switching between integrated
CD and CD changer
With Main CD Menu displayed,
press CD•C (
A14 ); CD Function
Menu ( 2 ) displayed.
MIX – Press to play all tracks in
random order; press again to stop
or select SCAN
SCAN – Press to play a brief sample
of each track; press again to stop or
select MIX
REPEAT – Press to repeat current
track; press again to stop
CD/CD•C – Press to switch play
between integrated CD and CD changer
QUICK START
To turn CD on, with TravelPilot
®
on
and CD installed press CD•C (A14)
To select next track up/down, on
rocker switch (A7) press
To fast forward/reverse, on rocker
switch (A7) press
To adjust volume, rotate volume
control (A3)
CD
To insert CD in changer, refer to
instructions supplied with changer
To start play with CD installed, press
CD•C (
A14 ), Main Tuner Menu ( 1 )
displayed and play begins with last
selected source (integrated or changer)
Tip: To adjust sound, press AUD
(A10); selected band TONE Menu
displayed, see Tone
Tuning
To fast forward/reverse, on rocker
switch ( A7 ) press ; CD will fast
forward/reverse audibly, to stop press
rocker switch (
A7 ) in any direction
To select next track up/down, on
rocker switch (
A7 ) press ; CD
will select next track/repeat current
or select previous track
To select different CD, press desired
softkey or on rocker switch (
A7 ) press
and hold for next disk up/down
To select different page, press
CD6–CD10/CD1–CD5 softkey
3 1 2
Function Menu Main Menu DSC Menu
01 01:23 (i) ( )
B–BOYS
8 CDC
01 01:23
(i) ( )
8 CDC
MIX CD J-TESH
CD 2 SCAN
REPEAT
*PETER G CD6–CD10 NAME
T
A
CD 1 13 (i) ( )
8 CDC
PROGRAM (leer)
TA OFF NO TIME
SCAN MAG CD RPT
MIX CD SETUP
N N N
PROGRAM – Press to program tracks
to play, see CD Programming
NAME – Press to add name to CD,
see CD Naming
Accessing Direct Software
Control Menu
This menu enables control of traffic
announcements, scan selection for
magazine or single CD, random play
of magazine or single CD, display
of track and time or track only, repeat
of single track or entire CD and setup
With CD function active, press DSC
(
A11 ); CD DSC Menu ( 3 ) displayed
To control a function, repeatedly press
softkey for that function
TA – Press to enable /disable Traffic
Announcements during CD play
SCAN – Press to enable scan of
entire magazine or single CD
MIX – Press to enable random play
of entire magazine or single CD
TIME – Press to enable/disable
Time display
RPT – Press to enable repeat of
entire CD or single track
SETUP – Activates Setup Menu,
see Setup
To accept displayed setting,
press OK (
A8 )
To exit DSC menu without change,
press ESC (
A9 )
2000 RNS150 Bosch Travel Pilot 6/15/00 1:52 pm Page 11