Blaupunkt LONDON RDM 43, Руководство по эксплуатации

Страница: 17 / 20

London RDM 43
34
For selecting a character:
●
Press the ON/OFF button
1
.
The selected character stops blinking
while the next character starts to flash.
For modifying the previous character:
●
Press the ON/OFF button
1
for longer
than two seconds.
Once you have finished your entry, press the
corresponding preset button of the next sta-
tion, which you would like to be named. The
entered name for the previous station is then
automatically stored.
For storing the adjustment:
●
Press the DSC button
4
once again.
Every time the station is selected, the speci-
fied name will be represented on the display.
The zone identification for traffic messages
(ARI) is no longer indicated.
A memorized station name can be deleted by
storing a new station on this button (i.e.
keeping the respective preset button depres-
sed for a longer period).
This function can be adjusted separately for
KeyCard 1 and 2.
Entry/Display of CD Name
You can enter a name for 30 CDs. The name
will be displayed each time the CD is in-
serted.
For entering a CD name,
●
press the DSC button
4
.
The display
C
a gives you “BEEP ON”
or “BEEP OFF”.
●
Press the rocker switch /
F
until
the display
C
a shows “DISC-NAM”.
●
Then LOAD DISC or TOC appears
before the display
C
a shows some
da-shes.
The first dash flashes. For changing the dash
and to enter a selected character,
●
press the right part of the rocker switch
<< / >>
E
several times.
The display will give you one after the other
the capital letters (A-Z), the umlauts, the
special characters and the numbers 0-9.
For selecting a character,
●
press the on/off knob
1
.
The selected character iluminates and
the following one starts flashing in the
display.
For changing the previous character,
●
press the on/off knob
1
longer than
2 secs.
When you have entered the name and wish
to enter a name for another CD, insert the
next CD. The entered name will be stored
automatically. For memorizing the entry,
●
press the DSC button
4
once again.
The entered name will be displayed each
time the CD is inserted.
An entered name will be deleted as soon as
a new name is memorized for the CD.
Deleting the TPM memory of individual
CDs (with DSC)
The DSC function allows you to completely
clear the memory of one or several CDs.
With the update function you can confirm the
TPM programmes which shall be kept in the
TPM memory.
Simply do not confirm those TPM program-
mes which shall be cleared.
Operating steps:
●
Press the DSC button 4.
●
Press /
F
until “UP-D” (update) is
on in the display.
The display will give you “LOAD DISK” after
a moment.