Blaupunkt LONDON RDM 43, Руководство по эксплуатации

Страница: 15 / 20

London RDM 43
32
Acoustic Signal after the Actua-
tion of a Key (BEEP)
All functions which require for a keystroke
longer than two seconds (e.g. memorizing a
station) are confirmed by an acoustic signal
(BEEP).
For switching the BEEP tone on or off,
●
press the DSC button
4
.
The display
C
a gives you “BEEP ON”
or “BEEP OFF”.
●
Using the rocker switch << / >>
E
you
can select between ‘BEEP ON’ (acou-
stic signal on) and ‘BEEP OFF’ (acou-
stic signal off).
For memorizing your adjustment,
●
press the DSC button
4
once again.
This function can be adjusted separately for
KeyCard 1 and 2.
Choosing the Display Colour
With this set you can match the display
colour to the colour of your vehicle’s dash-
board lighting. You can choose between
green and orange.
For changing the display colour,
●
press the DSC button
4
.
The display
C
a gives you “BEEP ON”
or “BEEP OFF”.
Changing the Audio Source with
SRC
You can shift between the connected audio
sources in the following order:
Changer
♦
radio
♦
CD
♦
Changer
For switching to another audio source:
●
Press the SRC button
7
.
Connection e.g. of a cassette or
DAT player
Having connected an external sound system
(via the AUX socket) you can switch between
the audio sources using the SRC button
7
.
(CD
♦
radio
♦
external unit
♦
CD).
The display
C
a will give you “AUX-IN”.
Programming with DSC
The car radio’s DSC function (Direct Soft-
ware Control) allows it to adapt several ad-
justments and functions according to your
personal preference and to store these indi-
vidual settings.
Adjusting the Volume of Traffic
Messages (ARI)
You can preselect the volume of ARI traffic
messages (see chapter Traffic Messages).
For changing the volume,
●
press the DSC button
4
.
The display
C
a shows “BEEP ON” or
“BEEP OFF”.
●
Press the rocker switch /
F
until
the display
C
a gives you “ARI” and a
number between 1 and 9 as volume
indication.
The car radio’s volume is identical to
the volume of the traffic messages.
For altering the setting,
●
press the rocker switch << / >>
E
(left - lower; right - higher).
The number on the display is changing
correspondingly.
For memorizing your personal adjustment,
●
press the DSC button
4
once again.
This function can be adjusted separately for
KeyCard 1 and 2.