42
FITTING
Removing the equipment
1
2
3
1. Frame
2. Reach with your fingers into the slot
at the front of the frame, and pull the
frame off. (To replace the frame, put
the side that has the slot downwards,
and insert it.)
3. Lever
Push the levers supplied with the
equipment as shown in the diagram
into the slots at both sides of the
equipment until they latch. The
equipment can be removed from the
instrument panel by pulling the le-
vers.
DIN rear fitting
(Method B)
Assembly using the threaded holes in
the side of the equipment.
1
3
2
5
2
5
4
Fixing the equipment to the standard
radio mounting clip.
1. Locate the main unit in such a way
that the screw holes in the clip and
threaded holes in the main unit are
aligned with one another, and fix the
screws at two places on each side.
Use either mushroom-headed
screws (5 x 6 mm) or countersunk
screws (4 x 6 mm), according to the
shape of the screw holes in the clip.
