50
VCD
1. The REPEAT function is not active
for VCD 2.0 (with PBC).
ILL
(illumination)
Press the ILL button to adjust the illu-
mination of the VFD display in the fol-
lowing sequence.
Brightness levels
4 3 2 1
Selecting a higher level will increase the
brightness of the VFD display.
The RESET button
The RESET button is located on the
housing, and must be activated with the
aid of a ballpoint pen or a thin metal
object. It will be necessary to activate
the reset button in the following cases:
-
The first time the unit is used after
connecting the cable.
-
The function buttons do not operate.
-
An error symbol is shown on the dis-
play.
Open
Press the OPEN button, so that the front
cover opens.
Remote control sensor (IR)
Point the remote control at the IR sen-
sor for receiving the remote control sig-
nals.
Flashing LED
The LED display will flash if the front
cover is not inserted into the main unit.
Switching the player off
Switch the equipment off using the ON
button on the front of the cover, or press
the corresponding key on the remote
control unit.
MAIN FUNCTIONS
