Blaupunkt BLUEBOT XVAC BPK-VCBB1XVB, Руководство пользователя

Страница: 20 / 88

20
INSTALLATION INSTRUCTIONS
1. Connect the power line and feed the excess wire
into the slot
• Direct sunlight will interfere with the charging signal and consequently, the robot may be unable to return to the
charging station.
• Ensure a space of more than 0. 5m on both sides of the charging station and a space above it of 1. 5m in the front
• If the power line is vertical to the ground, it may be dragged by the robot and consequently the charging station
may power off
• The charging indicator is normally on when powered on and off when charged
2. Place charging station against the wall and connect
the power
3. Please do not arbitrarily move the
charging station
and keep it
out of direct sunlight
4. Installation of the side brushes
Make the left-side brush (L) and the right-side brush (R) correspond
to L and R on the bottom casing, press L and R and the side brushes
are installed when you hear a “cracking” sound
NO
TE
EN
>0.5m
>1.5m
>0.5m
>0.5m
>1.5m
>0.5m