SE VENTO Expert W
8
www.blaubergventilatoren.de
The master ventilator is controlled by means of the buttons on the touch-sensitive control panel.
Ventilator connection status indicator. The indicator glows steadily while the ventilator connection is live.
These buttons are used to enable/disable the ventilator, and select speed 1, 2 or 3. The buttons remain dark in the
Standby mode. The buttons glow steadily while speed 1, 2 or 3 is enabled. The indicators blink intermittently if the
Manual Speed Setup mode is selected.
This button activates the Heat recovery mode.
This button activates the Ventilation mode.
This button activates the Party mode (speed 3 enabled by the timer set to 4 hours by default) or the Night mode (speed
1 enabled by the timer set to 8 hours by default). To activate the Party mode, press the
button and then immediately
press the
button. To activate the Night mode, press the
button and then immediately press the
button.
The filter contamination indicator activates automatically after 90 hours of unit operation. Respond to the alert by
replacing or cleaning the filters. After replacing filters in all the ventilators reset the filter timer.
To reset the timer, press and hold the
indicator for 5 seconds until all the buttons blink twice.
The indicator blinks if the (Master) ventilator connection is down. This button starts to glow steadily in case of an
emergency motor shutdown. To reset the alarm, press and hold the button for 5 seconds. After that all the buttons blink
twice to alert the user that the button can be released.
CONTROL
