12
o)
WARNING! Do not weld, flame cut or perform grinding works on or near the machine. Danger of
fire or explosion exists!
p)
Provide adequate ventilation when working in a confided space.
q)
Secure the maintenance area if necessary.
r)
Always read the enclosed OWNER’S MANUAL of the Hatz diesel engine before operating the machine.
s)
The OWNER’S MANUAL contains important information about getting the best performance and safe
operation / maintenance of the diesel engine.
t)
The OWNER’S MANUAL should be considered a permanent part of the engine and should remain with the
engine if resold.
3.7 Dust collector safety
a)
Always use a suitable Blastrac dust cleaner
to ensure a dust-free operation of the machine and clean
air at the workspace. Also the airflow helps to cool the machine and prevents overheating.
b)
Carefully read the Operating Instructions of the dust collector before use.
c)
The dust container/bag of the dust collector must be emptied regularly
. Comply with the local
waste treatment regulations considering the removed material.
d)
The dust hose must be connected properly with a hose clamp and industrial tape.
e)
The dust hose must be undamaged and free of obstructions.
f)
Always switch on the dust collector first!
3.8 Hydraulic safety
a)
Make sure all hydraulic hose connections are tightened and there is no leakage of oil.
b)
Over-tightening could damage O-rings. If a leak still persists, remove fitting and replace O-ring.
c)
Make sure the hydraulic hoses have no damages, signs of wear and tear or other defects.
d)
Hydraulic fluid under pressure is dangerous and can cause serious injury.
e)
Hoses and pipe work can be under high hydraulic pressure. The temperature can be above 37° C.
f)
The system runs at or below 170 bar. Never look for a leak when the unit is under pressure.
g)
Avoid leaks by keeping fittings and hoses tight, only check and service when not under pressure.
h)
Leaking hydraulic fluid is not only unsightly, it’s dangerous. It could make workplace floors slippery,
contaminate the environment and could create a possible fire/explosion hazard.
i)
Never change the oil pressure of the machine! Changing the oil pressure could cause serious damage to the
machine and could result in very dangerous situations!
j)
Only work with the hydraulic oil in an area that is well-ventilated, otherwise you must wear suitable
respiratory protection. Always wear Personal Protective Equipment when handling the oil:
-Protecting gloves (preferably made of nitrile or neoprene.)
-Safety goggles.
-Hydrocarbon-proof clothing and safety shoes.
k)
Avoid long and repeated contact with the skin, after contact wash thoroughly with water and soap.
Contact with eyes: Immediately flush eyes with cold, fresh water for a minimum of 15 minutes. Seek
professional medical attention.
l)
Do not eat, drink or smoke near the hydraulic oil.
m)
HV46 hydraulic oil holds no danger of intoxication.
n)
The hydraulic oil is stable at normal temperatures for storage, handling and use. However, the hydraulic oil
is flammable when exposed to certain conditions; Empty containers may contain flammable or explosive
vapors. Rags that are soaked with the product and paper or materials which have been used for absorbing
the spilled product are inflammable. Make sure that no accumulation occurs. Remove safely after use.
o)
Avoid sparks, open flames, extremely high temperatures and other sources of ignition.
p)
Please read the Safety Data Sheets for additional information regarding the hydraulic oil.
q)
Level should be half the glass of the level indicator. If you don’t see the oil in the indicator, the level is too
low. If the level is above the glass, the level is too high.
r)
Only use HV46 hydraulic oil (Part nr. E00481), non-compatible fluids could cause damage to the unit or
serious injury.
s)
The hydraulic oil and the filter should be replaced at least annually.
t)
Work on hydraulic equipment or operating materials may only be undertaken by a skilled hydraulic engineer
or by trained persons under the guidance and supervision of a skilled hydraulic engineer as well as in
accordance with the hydraulic engineering regulations
Содержание BMP-4000E
Страница 1: ...ORIGINAL in English OPERATING INSTRUCTIONS BMP 4000E BMP 4000G VERSION 1 8...
Страница 5: ...5...
