Blastrac 2-45D, Руководство по эксплуатации

Страница: 25 / 185

Operating Instructions 2-45D
General
8
3.9 Abrasive sealing
Magnetic seals are fitted to the front and the sides of the blast housing
outlet and are surrounded by rubber and brush seals. At the rear there
are four seals sliding over the floor.
The seals are employed to seal the blasting area in a way to avoid
leakage of any abrasive.
The correct height adjustment of the magnetic seals (16-20 mm) is very
important for optimum functionability of the machine. The adjustment
can be carried out by means of shaft nuts at the front and rear wheels.
Fig. 3.5
1
Side brush housing
2 Side magnet
3 Front magnet
4 Front brush
5 Front seal rubber
6 Side seal rubber
7 Rear brush
8 Airflow adjuster