24
9
. Technical data
1-8DPF40 Global
Power consumption blast motor
4KW
Electrical connection
(voltage is given on the control
box)
400V / 50Hz
400V / 60Hz
16A
Blast width
200 mm
Abrasive consumption
75 g/m
²
Drive speed
0 – 23 m/min
Length
1700 mm
Width
380 mm
Height
1050 mm
Weight
135 kg
Sound emission pressure level
Uncertainty
L
pA =
76 dB(A)
K= 2,5 dB
Vibration level (Hand-arm)
Less than 2,5 m/s
²
Dust hose connection
Ø75 mm
Suitable filterunit
Contact Blastrac BV we will assist you with a
good advice
The electrical diagrams of the electrical system are placed inside of the control panel.
Design and specifications are subject to change without notice by Blastrac BV
IMPORTANT NOTES:
The indicated values are measured on new machines. Noise and vibration levels will vary in different
circumstances. Area influences like open outside or closed inside space, ambient temperature, different surfaces
to be treated, daily use, different tools or accessories, poor maintenance, etc. will give different values at all time
and could increase the exposure level over the total working period.
The declared vibration and noise emission levels represent the main applications of the machine. The values may
be measurements from a representative sample of technically comparable machinery. The values may be used
for a preliminary assessment of exposure.
A precise estimation of the level of exposure to vibration and noise should also take in account the times when
the machine is switched off or even running, but not actually in use. This may significantly decrease the
exposure level over the total working period.
