User Manual professional h.264 & MPEG2 encoder MPE-4000
MPE-4000-MPEG-encoder-manual-RR-03-2018.docx
Page 38 / 44
Advanced -> OSD affairs settings
Click “
OSD affairs settings
” on the top column will show the setup where you can configure
the OSD affairs as per configuration.
Troubleshooting
The manufacturers ISO9001 quality assurance system has been approved by CQC organization. For guarantee the
products’ quality, reliability and stability. All products have been passed the testing and inspection before
shipping out from factory. The testing and inspection scheme already covers all the Optical, Electronic and
Mechanical criteria which have been published by the Manufacturer. To prevent potential hazard, please strictly
follow the operational conditions.
Prevention Measure
Installing the device at the place in which environment temperature between 0 to 45 °C
Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if necessary
Checking whether the input AC voltage is within the power supply working range and the connection is
correct before switching on device
Checking all signal cables have been properly connected
Frequently switching on/off of the device is prohibited; the interval between every switching on/off must be
higher than 10 seconds.
Conditions need to unplug power cord
Power cord or socket damaged.
Any liquid flowed into device.
Any stuff causes circuit short
Device in damp environment
Device was suffered from physical damage
Longtime idle.
After switching on and restoring to factory setting, device still cannot work properly.
Maintenance needed
Check and select the affairs name
Select the channel
Set the start time,
end time and type
