BLANKOM HDE-(4)264B/265B User Manual
Version 1.1 – 02-2019
Page - 4 -
techn. data are subject to change w/o notice!
Default Values
The factory default administrator account:
admin
The factory-default user password:
admin
The factory default IP address:
192.168.1.168 NM 255.255.255 GW 192.168.1.1, DNS
settings might vary but can be changed to local needs
Set the administrator’s computer IP as: 192.168.1.* to avoid IP conflicting with the units own default IP
address 192.168.1.168.
192.168.1.*: use an IP setting “*” in the number range 2-254 and except the units default IP.
Remark: .0 is often the network router, .1 often the Gateway of the used router, .255 might be a network
broadcasting address.
Please change these account settings according to your local policy and network. -> Do not forget to safe and
backup the configuration by Web-Interface and its related system-sub-menu.
The encoder can be always set back to factory default settings by using the RESET-switch in Web-IF or the
button at the front.
A few words about Network settings and VLC
– Player on a PC/Laptop.
Usually the default IP settings should be changed according to your local network.
If you have i.e. a company network structure with multiple subnet’s like
A:
-
192.168.0.1 (Gateway example a Fritzbox –DSL Router)
-
Netmask 255.255.255.0
-
DHCP enabled, or your IP Range for static IP Addresses are 192.168.0.100 - 250
B:
-
192.168.1. … and so on…
You should configure the network port of the Encoder to your preferred network by using a static and FREE
IP address. Avoid collisions please!!!
If you use the default settings and cannot receive the encoded streams in your device by VLC, please make
sure, your network card doesn’t have 2 IP addresses manually setup:
