6
8-fold IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
4x CI
→
ATV (8x AM)
A-PALIOS-IPM4CI
Part N
o
: 5113.81 / 5113.83
8. Settings by web interface
To use all functions of the device activate Java Script in your browser settings.
Settings via checkbox are applied immediatelly, but not stored in memory! So they would be lost on a possible restart of the
device. To save these settings the “send“ button must be pressed.
Please send and store your settings by pressing the „send“ button after each change.
8.1 Network connection to the computer
System requirements:
- PC/ laptop with 10/ 100 Mbit Ethernet interface
- Internet browser (e.g. Windows Internet Explorer), capable JAVA script
Setup the connection:
The A-PALIOS-IPM4CI has to be connected to PC network using an Ethernet cable. The default IP address of the device is 192.168.1.100.
In order to access the web interface of the A-PALIOS-IPM4CI from a PC, the PC has to be in the same subnet (192.168.1.XXX; subnet
mask 255.255.255.0), where XXX is not used by any other device in this subnet.
If multiple A-PALIOS-IPM4CI are connected to the same network each device must be set to its own unique IP address to avoid address
conflicts.
After these settings, the IP address of the PC has to be adjusted to match the network. Now the devices can be accessed via browser
with the new IP address.
If activated (Setup→GUI Settings→Activate user and keyword check) the user has to log in now ( »chapter 8.2.8).
After successful registration or a connection establishment without password (default setting) the start page of the device is displayed
( »chapter 8.2.1).
