Blanco BIC95T, Инструкция по эксплуатации

Страница: 7 / 20

OPERATING INSTRUCTIONS
The basic layout of the induction cooktop is shown in the diagrams below.
DESCRIPTION DESCRIPTION
01 On/off power touch control 07 Melting and Keep Warm Functions touch control & indicator
02 Cooking Zone Increase Power touch control 08 Increase Timer touch control
03 Cooking Zone Decrease Power touch control 09 Decrease Timer touch control
04 Key Lock Function touch control & indicator 10 Cooking Zone Power LED display
05 Stop N Go Function touch control & indicator 11 Timer LED display & Zone indicators
06 Boost Power touch control
The induction cooktop appliance is operated by touching the control buttons, with the functions confirmed by
LED displays and acoustic signals. Clean glass surface with a damp cloth and dry before use.
Note: All cooking zones have a pre-set limit on the length of time they will run without any setting changes
(table further in the manual).
Turning On and Turning Off the Cooktop Appliance
NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel on the appropriate
cooking zone. If the correct sized cooking vessel is not placed on the cooking zone, the
Cooking Zone Power
display will indicate pan not detected. Settings can be changed, but the zone will not work until the pot is
replaced.
If the appliance is in
Stand-By-Mode, it is put into Operating-Mode by pressing the On/Off touch control for at
least 1 second. A beep signal indicates the successful operation acoustically.
On all
Cooking Zone Power LED Displays a ´0` will appear.

If there is no operation within 10 seconds, all the Cooking Zone Power LED Displays will automatically
turn off and the appliance will be re-set into Stand-By-Mode .

If On/Off is pressed for more than 1 second (in Operating-Mode ), the appliance is switched off and is set
into the Stand-By-Mode again. The appliance can be turned off by pressing On/Off at any time.

If there is any residual heat remaining in a cooking zone, this will be indicated in the corresponding
Cooking Zone Power LED Display as a red “H” .

Note: All cooking zones have a pre-set limit on the length of time they will run without any setting
changes (table further in the manual).
02 01 03
04
05
06
07
08 09
10
3
COOKING ZONE CONTROL (5 IN TOTAL) RIGHT HAND SIDE CONTROLS
11
LEFT HAND SIDE CONTROLS