Blanco BIC95T Скачать руководство пользователя

Страница: 8 / 20

Operating A Cooking Zone

Each cooking zone has its own controls (between the left hand side controls and right hand side controls).
From left to right, they are left front, left rear, centre, right rear and right front.

1. A cooking zone can be activated by pressing either the

Cooking Zone Increase Power touch control

(02)

which sets the power level at 4 or

Cooking Zone Decrease Power touch control

(03) which sets the power

level to 9. The power level is displayed in the

Cooking Zone Power LED display

(10) above the touch

sensors.

2. The values can then be increased or decreased (from 0-9) using the same touch sensors. All of the other

cooking zone displays will have a visible ‘O’, value (if in use) or ‘H’ (if recently used).



The

Cooking Zone Power touch Controls

can be pressed at any time to adjust the power level.



The

Cooking Zone Power LED Display

(10) works on a thermostat system. This means that the cooking

zone will switch on and off in order to remain at the chosen Power Level. NOTE the cooking zone will
remain on for longer periods if a higher Power Level is chosen, alternatively the cooking zone will be on
less regularly on lower Power Level Settings.

Turning Off Individual Cooking Zones

A particular cooking zone can be turned off in 2 different ways:
1. Simultaneously press the

Cooking Zone Increase Power touch control

(02) and the

Cooking Zone

Decrease Power touch control

(03). A beep signal will sound and “0“ appears in the

Cooking Zone Power LED

Display

of the selected cooking zone.

2. Reduction of the power level to “0“ by operating the

Cooking Zone Decrease Power touch control

. If there

is residual heat from this hotplate remaining, a red ´H` will be shown in the

Cooking Zone Power LED Display

The Boost and Super Boost Functions

The Boost and Super Boost functions are available on all of the cooking zones. They are used to speed up
the initial heat up time (say boil a pot of water) and only runs for a short time (10 minutes).

1. Place the cookware on the appropriate cooking zone.
2. Press

the

Boost Power touch control

(06) once for the boost function (the indicator above the touch

control will be lit) or twice for the Super boost function (the indicator above the touch control will flash).
While the indicator is on, press the

Cooking Zone Increase Power touch control

(02) of the cooking zone,

and its

Cooking Zone Power LED Display

(10) will show “P” (Boost function) or it will flash

, ll, P (Super

Boost function.

3. Once the 10 minutes has passed the

Cooking Zone Power LED Display

will change to 9 and the cooking

zone power level will drop to 9.



Note: The Boost and Super Boost functions use significantly more power than the nominal power (see

appliance details). If used in conjunction with other cooking zones, the max power available on the other
cooking zones may be reduced to keep power usage within the total allowed.

To disable the Boost functions, press the

Cooking Zone Decrease Power touch control

(03) and the power

level will turn down to 9. The power level can now be adjusted as normal.

Activating The Key Lock

The key lock is used to set the appliance up so that it cannot be operated without disabling the lock. This is a
useful feature when cleaning down the glass, or to stop children playing with the controls while in use.

1. Put

into

Operating-Mode

by pressing the

On/Off

touch control

for at least 1 second.

2. Set any cooking zone power levels and functions (if needed).
3. Press

the

Key Lock Function touch control

(04) for 2 seconds until the indicator above the touch control

lights up. The Key Lock is now active, and the only touch sensor that will work is the