Blanco BIC95T, Инструкция по эксплуатации

Страница: 9 / 20

Minute Minder Function
The Minute Minder function is a timer that does not affect any operation on the appliance, but can be used as
a reminder to take action (add a spice, turn meat etc.).
1. The appliance must be in Operating-Mode (any cooking zone can be running).
2. Press the Increase Timer touch control (08) and Decrease Time touch control (09) simultaneously for a
second. The Timer LED display (11) will display “00” (the current set time), its decimal point will be lit (the
timer is active and can be adjusted) and the indicator between and below the Timer LED display will flash
(Minute Minder function is active and is being displayed).
3. Within 5 seconds, adjust the time setting by using the Increase Timer touch control (08) and Decrease
Timer touch control (09) (from 00 to 99 minutes) until the desired length of time is set. The timer starts as
the last button is pressed. 10 seconds after the last button is pressed, the Timer LED display decimal
point will turn off (Timer is no longer active), the Minute Minder indicator will continue to flash and the
Timer LED display will start counting down to “00”. If no cooking zone is active, the appliance will change
to the Stand-By-Mode, but the Minute Minder function will continue to operate.
4. When the set time has passed, the appliance starts to beep, and the Timer LED display will flash “00”.
Press either Timer touch sensor to turn the sound off and return the appliance to display its operations as
before.

The Minute Minder time can be adjusted at any point by activating the function and adjusting as above.
To disable the function, adjust the time to “00”.

The Minute Minder function can be used in conjunction with other Timer functions.
Timer Function
The timer function differs from the Minute Minder function in that it will turn off a cooking zone at the end of the
time. It can be set for one or more cooking zones (each working independently). The Timer functions are set
up in the same way as the Minute minder function.
1. First set up the appliance with cookware placed on cooking zones and set all power levels (the timer
function cannot be set up if the cooking zone is inactive).
2. Press the Increase Timer touch control (08) and Decrease Time touch control (09) simultaneously for a
second (as per the Minute Minder function, the Minute Minder indicator will be flashing).
3. Repeat the operation. A new Timer Zone indicator will begin to flash which is for the first active cooking
zone (this cycles through clockwise from the Left Front cooking zone around to the Right Front cooking
zone, and back to the Minute Minder). Once the correct indicator is flashing, the time can be set as per
the Minute Minder function.
4. Multiple timers can be set at the same time, as well as the Minute Minder function.
5. When all timers are set, leave the touch sensors for 10 seconds. The
Timer LED display decimal point
will turn off and the Timer Zone indicator (or Minute Minder indicator ) with the shortest time will start to
flash, and the shortest time will be displayed.
6. When a timer function finishes, the appliance will start to beep indicating the cooking zone has finished.
The cooking zone will turn off and the Timer LED display will flash “00” for 2 minutes (unless a button is
pressed). The Timer will then swap to the next shortest timer function. If all timer functions finish and
there are no other cooking zones active, the appliance will return to the
Stand-By-Mode after the alarm
finishes.
Auto Cooking Function
The Auto Cooking Function allows you to set any or all cooking zones up so that they run at a high power
level for a period of time, and then drop the power down to a lower level.
1. The appliance must be in set to Operating-Mode with cookware in place (the cooking zone can be off or
running).
2. Press the Cooking Zone Increase Power touch control (02) until the power level reaches 9, then press 9
again ( Cooking Zone Power LED Display (10) changes to “A”).
3. Press the Cooking Zone Decrease Power touch control (03) until the lower power level is displayed. The
Cooking Zone Power LED Display will start to alternate between “A” and the lower power level. See table
for times on next page.
4. The lower power level can be adjusted higher once, and after that, any adjustment will reset the power
level to 9.
5