When the hob is in standby, the
safety lock button
is active and the relative
LED
is on.
After removing the
safety lock button
(pressing the
symbol for 2 seconds), switch on the hob by
pressing the button
for
2
seconds.
If no function is activated within 10 seconds of switching on the hob, it switches off automatically.
The associated
cooking zone
is indicated ne
x
t to each control area. Identify the
cooking zone
to be
activated (
) and activate it using the buttons
and
to regulate the level of cooking
required on
a user scale of 1 (minimum) to 9 (maximum).
6
Model BCC905T
Every time that a
button
is pressed, it is confirmed by a check beep. The functions of hobs that use
this
type of technology are activated by gently pressing the serigraph
buttons
on the surface of the hob.
The
first time the hob is connected to the electricity supply, an operating check will be run automatically
and all
the warning lights will come on for several seconds.
LEFT FRONT
LEFT REAR
CENTRAL
RIGHT REAR
RIGHT FRONT
button and the double zone led will light up,
Double cooking area activation
After activating the cooking
zone
, press the
or
depending on whether the plate is concentric or oval.
button and the corresponding
LED
will be
Double cooking area deactivation
When the double cooking
zone
is active, press th
e
or
deactivated.
MINUTE MINDER
There is a minute minder for setting cooking
zone run
times from 1 to 99 minutes.
To set the minute minder, turn on the cook top, select a cooking zone and set the desired cooking setting.
Once this has been done, press the
or
below the timer symbol
.
Set the desired time by
pressing the
and
sy
buttons
. The Minute Minder will begin 5 seconds after the last key has been
button
pressed. When the time has ended, there will be 2 beeps at 3 second intervals for one minute. The
minute minder function does not deactivate the cooking zone.
To stop timer mid cycle, use the
to decrease the time to 0.
TIMER
There is a timer for setting cooking
zone run
times from 1 to 99 minutes.
To set the timer, turn on the
Hob
and select the desired cooking zone and setting. Press the
button
under the timer
icon
.This will cause all zones to flash "t" in the display.
Press the
button
of the required cooking zone.
This will cause the cooking setting to flash alternately
with "t", this shows that the timer has been activated for this zone.
Set the desired cooking time by using the
and
button
s under the timer symbol.
The timer will indicate that it is set by have a dot next to the time shown.
When the time has ended, the cooking zone will turn off
and
there will be 2 beeps at 3 second intervals for
one minute.
To stop timer mid cycle, use the
button
to decrease the time to 0.
USE