INSTALLATION
TECHNICAL INSTRUCTIONS
FOR THE INSTALLER
Installation, transformations and maintenances
below listed, may only be carried out by a
competent technician.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
A wrong installation may provoke damages to
persons, animals or things, for which the builder
can not be responsible.
Throughout the life of the system, the devices
for the safety and automatic regulation of the
appliances must only be modified by the
manufacturer or the duly authorised supplier.
After having cleared out all the packing
components, make sure of the integrity of the
appliance.
If you are in any doubt, do not use the appliance
and contact qualified personnel.
The packing elements (cardboard, bags,
polystyrene, nails...) must not be left within the
reach of children as they are potential sources
of danger.
Make a cutout in the worktop, according to the
dimensions indicated in fig. 4; make sure that will
be respected the critical dimensions of the space in
which the appliance has to be installed (fig. 5).
In order to avoid accidental contact with the
surface of the box of the overheated hob during
use, it is necessary to install a wooden divider at a
minimum distance of 120 mm from the top,
fastening it in place with screws (fig. 4).
COMPLY WITH THE DIMENSIONS (in mm)
A
B
C
D
E
F
(90)
860
490
55
55
60 min.
min. 120 mm
FIG. 4
FIG. 5
IMPORTANT: a perfect installation, adjust-
ment or transformation of the cook top to
use other gases requires a QUALIFIED
INSTALLER: a failure to follow this rule will
void the warranty.
1
2
