BLADEZ XTR-HD, Руководство по продукту

Страница: 11 / 16

Page 11
Riding
Before going for a joy ride, makes sure that all of the bolts and screws are tightened.
Insert key and turn clockwise to the ON position, several red lights will come on
indicating the unit is turned on as shown in Fig 12.
NOTE: Please note that head light can be turned on and off.
NOTE:
If the unit is at the ON position for over 10-15
minutes without moving, Smart Power will shut itself OFF.
To reset, turn the unit OFF, wait a few seconds and then
switch it back ON again.
Put one foot on the deck of the XTR-HD. While pushing off
with the other foot, gently squeeze the ACCELERATOR
LEVER, on the right side of the handlebars. The XTR-HD
will begin to move on its own power.
Control your speed by pressing and releasing the accelerator lever. You do not need to
constantly hold down the accelerator, but can rather use small bursts of power to control
speed and maximize battery life.
To stop, release the accelerator handle and depress the BRAKE LEVER (on the left
side of the handlebars). Depressing the brake will disengage power to the motor.
When the unit feels like it is losing power, or not accelerating to full speed you are ready
to RECHARGE.
*NOTE: At this time, there is still charge in the battery but it is not advisable to fully
discharge the batteries.
FOLDING AND STORAGE
When you are done riding the XTR-HD you can fold it down for compact storage,
carrying and transportation. Make sure the POWER SWITCH is in the OFF position and
the charger is unplugged from the socket.
Always charge your POWERBOARD fully prior to storage!
To fold down the XTR-HD, use one hand to push down on the FOLDING HANDLE,
while using the other to gently push down on the handlebars. BE CAREFUL NOT TO
HIT YOUR HEAD WITH THE HANDLEBAR. Push down until you feel the mechanism
lock into place.
You can now carry the XTR-HD by the handlebar tube.
Fig.12
Fig.12