BLADEZ XTR-HD, Руководство по продукту

Страница: 8 / 16

Page 8
GETTING STARTED
Install handle bar
Before using your XTR-HD, loosen the 4 bolts from the
Billet Aluminum Stem with the Allen Wrench provided, and
then remove the stem from the cap as shown in Fig 1.
Place handle bar onto the Billet cap with the hole facing
down towards the threaded bolt as shown with arrow in Fig
2.
Place the Billet Stem on top of the handle bar and the cap
and tighten the bolts to secure the handle bar onto the cap
as shown in Fig 3.
Unfolding Instruction
1. To unfold the XTR-HD, begin by pressing
down on the FOLDING HANDLE with one
hand (Fig. 4), while gently pulling up on the
handlebars with the other hand.
2. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place (Fig. 5).
Cap
Stem
Fig. 1
Fig. 2
Fig. 3
Fig. 8
Fig. 4
Fig. 5