manualshive.com logo in svg

BLADDERSCAN BVI 6100, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
BLADDERSCAN BVI 6100 Скачать руководство пользователя страница 20

14

1.  Plug the charging cradle into an electrical wall outlet.

2.  Place the BladderScan instrument in the charging cradle. The scrolling‑segments battery icon displays, 

indicating that the instrument is charging.

If the battery icon does not appear, then the instrument was completely discharged. Allow the battery to 
charge for 2 hours. If the scrolling‑segments battery icon does not appear after 2 hours, reactivate the 
instrument according to the following procedure.

PROCEdURE 3.  ACTIVATE THE BLAddERSCAN INSTRUMENT (OPTIONAL)

Complete this procedure if the battery is completely discharged, or if after 2 hours in the charging cradle the 
instrument does not show the scrolling‑segments battery icon.

1.  Using the tip of the activation tool, press the Activation button located just above the Scan button. 

2.  Place the BladderScan instrument in the charging cradle or docking station until the “full battery” icon is 

displayed.

Note: When you are not using your instrument, Verathon

®

 recommends that you store it in the charging 

cradle in order to ensure that your instrument is always sufficiently charged. The charging cradle cannot 
overcharge the battery.

PROCEdURE 4.  INSTALL SCAN POINT SOFTWARE (OPTIONAL)

If you are using Scan Point

®

 Image Management Technology, install it according to the instructions in the 

Scan Point user’s manual. Refer to the manual for further instructions on how to use Scan Point or how 
to set up and install the Scan Point label writer. For more information, see the section 

Scan Point Image 

Management Technology (Optional)

.

Содержание BVI 6100

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды