TM
BLACOH Fluid Control
2
Certain models made for the European market are intended for use in potentially explosive atmospheres and meet the
requirements of ATEX directive 2014/34/EU. These models have the AT designation at the end of the part number, comply with
ISO 80079-36, and have an ATEX rating of II 2GD Ex h IIB T4 Gb Db. AT models have a grounding lug and must be grounded
(earthed) before operation.
ATEX Standard
General Safety
ATEX models must be grounded (earthed) before operation�
Always wear safety glasses and other appropriate safety equipment when installing or repairing SPILLSTOP.
Temperature limit is determined by the liquid inside the SPILLSTOP and materials of construction. SPILLSTOP has no moving
parts to generate heat.
DO NOT use SPILLSTOP with incompatible fluids. Consult distributor or factory if you are not sure of the compatibility of fluids
with SPILLSTOP.
Static spark can cause an explosion resulting in severe injury or death� Ground SPILLSTOP and pumping system
when pumping flammable fluids or operating in flammable environments.
WARNINGS
Danger of serious injury or death could occur if these warnings are ignored.
CAUTIONS
Equipment damage, injury or death could occur if these cautions are not observed.
NOTES
Special instructions for safe and satisfactory installation, operation and maintenance.
The following symbols indicate cautions, warnings and notes that must be observed for safe and satisfactory installation, operation and
maintenance.
Safety Warnings
SPILLSTOP should only be installed, operated and repaired by experienced and trained professional mechanics. Read and observe all
instructions and safety warnings in this Manual before installing, operating or repairing.