9
8
English
English
LT-ECHO 10 Front Panel
1. INPUT
Plug your guitar in here. Always use a good quality screened guitar lead.
2. VOLUME
This controls the volume of the Clean and Overdrive Channels. Turning it clockwise increases
the volume.
3. OD (OVERDRIVE)
Press this switch to select the Overdrive Channel. When the switch is in the Overdrive
Channel is selected. When the switch is out the Clean Channel is in operation.
4. EQ/ISF (INFINITE SHAPE FEATURE)
The patented ISF control allows you to choose the exact tonal signature you prefer. Fully
counter-Clockwise has a more American characteristic with a tight bottom end and more
aggressive middle, and fully clockwise has a British characteristic which is more ‘woody’ and
less aggressive.
5. DELAY ON/OFF
Press this switch to engage the DELAY. When the switch is out the DELAY is off.
6. DELAY TIME
This controls the amount of time and feedback on the DELAY. Turn the knob clockwise to
increase the time and feedback for a spacious large room feel, and counter-clockwise to
decrease the time and feedback for a more slap-back type effect.
7. MP3 / LINE IN
Connect the output of your MP3 or CD player here. Adjust the player’s volume to match that
of your guitar to enable you to play along. Note: the connection is stereo.
8. SPEAKER EMULATED OUTPUT & HEADPHONES
This output emulates the tonal characteristics of a guitar speaker cabinet and provides
a natural overdrive tone for connection to a recording device or mixing desk, and for use
with headphones. Note: when a lead is connected here the combo’s internal speaker is
disconnected.
9. POWER INDICATOR LIGHT
The power indicator will light when the amplifier is switched on.
10. POWER
This switch is used to turn the amplifier on and off.
LT-ECHO 10 Rear Panel
1. MAINS INPUT
The mains lead should only be connected to a power outlet that is compatible with
the voltage, power and frequency requirements stated on the rear panel. If in doubt
get advice from a qualified technician.
