Blackmagicdesign Pocket UltraScope, Руководство по эксплуатации

Страница: 9 / 35

How to Install on a Windows PC
9
Before Connecting Pocket UltraScope to your USB 3.0 computer
IMPORTANT INFORMATION
If your computer uses the NEC chip for its USB 3.0 connection, then you might need to update its
software driver before you install your Blackmagic Design USB 3.0 product.
USB 3.0 is a new technology, so it requires the latest version of the NEC software drivers to enable the
high speed performance required for high definition video capture and playback.
Please follow the instructions to check if your computer has the NEC USB 3.0 chip, and if its software
driver needs updating.
Check your Computer
The first step is to check your computer to see if it uses the NEC chip and if the software needs
updating. This can also apply to plug in USB 3.0 cards that use the NEC USB 3.0 chip as well.
To check the firmware and driver versions installed on your computer, you will need to run the
Renesas Electronics USB 3.0 Host Controller Utility
.
If your computer has the NEC chip, then this utility will already be installed on your computer.
Go to the
Start/Programs
menu on your desktop, then click
All Programs/Renesas
Electronics
and then
USB 3.0 Host Controller Utility
.
Once you run this, it will indicate your current driver and firmware version. You will need to have
firmware version 3.0.2.5, and driver version 2.0.4.0, or higher. If not, you will need to download and
update both the firmware and the driver, as described in Step 2.
Download the Updates
If you need to update your NEC driver and firmware, then the next step is to download the
software and install it on your computer. The NEC USB 3.0 driver and firmware packages can be
downloaded from the following website
www.station-drivers.com/page/nec.htm . Double-click
the downloaded files to extract the installers to your preferred directory.
2
Checking the NEC driver and firmware on your computer.