Blackmagicdesign Pocket UltraScope, Руководство по эксплуатации

Страница: 11 / 35

How to Install on a Windows PC
11
Connecting Pocket UltraScope to your USB 3.0 computer
Before using Intensity Shuttle, it is essential to run the latest USB 3.0 drivers and firmware for your
USB 3.0 equipped motherboard. Currently the NEC USB3 Controller uPD720200 is used by all
motherboards recommended by Blackmagic Design. It is essential to update its firmware version
to 3.0.2.5, and driver version to 1.0.20.0, or newer. These updates can be found on the websites of
some motherboard and computer manufacturers as well as via third party driver websites including
www.station-drivers.com/page/nec.htm .
Use the included SuperSpeed USB 3.0 cable to connect Pocket UltraScope directly to a dedicated USB 3.0
port on your compatible computer.
If Pocket UltraScope software has previously been installed and offers to update the firmware, click
Update
to run the update. When the firmware update is finished, follow the onscreen prompt to restart
the computer.
Pocket UltraScope is now ready for use. You can connect a SDI cable to Pocket UltraScope at any time. The
connection diagrams toward the end of this manual show how to connect Pocket UltraScope to various
kinds of video equipment.