Blackmagicdesign Pocket UltraScope, Руководство по эксплуатации

Страница: 8 / 35

How to Install on a Windows PC
8
Installing the UltraScope card in your PC
Remove the power plug from the back of your computer. This is a safety precaution before opening your computer.
Ensure that you are statically discharged by using a static strap.
Remove the side cover of your computer to gain access to the PCIe slots.
Remove your UltraScope PCIe card from the protective static bag making sure you don’t touch the gold connectors
on the base of the card. These precautions should be taken when handling any PCI card.
Remove the metal port access cover and screw from the back of your computer.
Remove the protective cap from the LC connector port of the fiber optic module. Don’t throw it away as the
protective cap will be needed to prevent dust if the LC connector port is exposed when no fiber optic cables are
connected.
Pull the wire tab outward to an angle of 90° to release the SFP module latch.
Grip the main portion of the SFP module, between your thumb and forefinger, and pull it from the SFP module
port. Do not pull the wire tab as it might break and prevent the SFP module from being removed.
Install Blackmagic UltraScope in a suitable PCI Express slot in your computer, ensure that it clicks firmly into place
and secure the card with a screw.
Replace the SFP module and push the wire tab back to its original position.
If you are not ready to connect fiber optic cables to the LC connector port, replace the protective cap.
The procedure for installing a graphics card is similar to the above.
Now replace the side cover of your computer. Reconnect the power and start up the computer.
1 2
1 1
Windows
Mac OS X
1 2
1 1
3 4
4 3