STL3500
3
I) WARNINGS – SAFETY INSTRUCTIONS
The manufacturer hereby refuses to accept any responsibility for injury to persons or damage to equipment or property if
it appears that incorrect handling of the lift has occurred. This instructions manual only describes the operating and
safety aspects which are necessary to the people who are using and installing the equipment.
In order to understand the terminology used in this manual, the person performing the installation work should have
specific experience in industrial work, service, maintenance and repair activities, and must also be able to explain the
drawings and the descriptions contained in this manual to other people. At the same time, he must be aware of the
general and specific safety regulations which apply in the country where the lift is being installed.
SECURITY
It is important to read this section carefully since it contains important information about the risks which the operator of
the lift will be exposed to if the lift is not used properly. Please find below useful information about how to avoid
dangerous situations.
WARNING
In short, the lift is not suitable for the following purposes:
-
Washing and spraying work
-
To apply force
-
To be used as a goods lift
The manufacturer hereby refuses to take into account any claim for damages arising in connection with injury to people
or damage to vehicle or other property due to incorrect and/or unauthorized use of the lift.
During lifting and lowering movements, the operator must be within the “OPERATOR AREA” as shown in figure 1. The
presence of any person in the “DANGER AREA” is strictly forbidden. The presence of people under the vehicle is only
permitted if the vehicle is in high lifting position and with mechanical safety.
Figure 1
WARNING
The lift is designed to lift cars of weight not exceeding 3500kg and hold them in a certain position in a covered
working place.
Any other form of use is forbidden.
