STL3500
18
VII) OPERATION
Before installing or removing of the vehicle from the lift, make sure the lift is completely down.
Position the vehicle very slowly on the lift making sure that the vehicle is well centred on the platform.
LIFTING:
1)
Turn the main switch (1) to the position “1”.
2)
Press on the lifting button (2) to raise the lift until the 1st stop.
3)
Rotate the arms, and position the lifting pads under the vehicle observing the lifting points
recommended by the manufacturer of the vehicle.
4)
Press again on the lifting button (2) to continue the lifting.
LOWERING:
5)
Press on lowering button (3) until the lift stops. Press again on the lowering button (3): The anti-
crushing safety device will be activated. The lift will stop a second time to prevent the arms touching
the floor.
6)
Remove the lifting pads and rotate the arms to their storage position.
7)
Press again on the lowering button (3) to continue the final lowering.
Figure 14
CHECKS
-Carefully monitor the lift and its load during lifting/lowering operations.
-Make sure the acoustic alarm device works correctly during the final phase of lowering.
