17
H.264 DVR User Manual
SECTION 3: SYSTEM SETUP
RTS-485 D+
RTS-485 D-
Open the PTZ submenu by selecting the submenu button.
NOTE
Connect speed dome cameras that support RS-485 directly to the RS-485 port. If the camera is controlled through an RS-232C
interface, use an RS-232C to RS-485 signal converter.
Use the PTZ setup screen to select the following options for the camera PTZ controller:
CHANNEL
:
Channel connected to a PTZ device
NAME
:
Protocol type
SPEED
:
19200, 14400, 9600, 4800, 2400
ID
: 0 ~ 63
3.4.4 MOTION ZONE Setup
Select MOTION ZONE using the
p
,
q
,
t
,
and
u
buttons, select either
PARTIAL ZONE
or
FULL ZONE
, then press
SEL
.
FULL ZONE:
The motion sensor is active on the whole screen. Set the level of sensitivity for MOTION SENSITIVITY.
PARTIAL ZONE:
The motion sensor is active in the set detection frame (highlighted in green). To select or deselect a block
for motion detection, use the
p
,
q
,
t
,
and
u
buttons to move to the block, then press
SEL
. Press
ESC
to return to the
DEVICE
menu.
