Black Widow Security 6150, Руководство по установке

Страница: 4 / 16

4
Programmable Features
Step Function Button 1 Button 2 Button 3
1. Arming Mode Active Passive
2. Auto Rearm Off On
3. Normal/Silent Arming Normal Silent
4. Ignition Locking On Off Override Code Set
5. Ignition Unlocking All Doors Driver only Off
6. Door Unlock Pulse Single Double
7. Door Lock Pulse Width 1 second 3 seconds
8. Passive Locking Off On
9. Entry Delay with Passive Arming Off On
10. Bad Zone Report 5 seconds Off
11. Auxiliary 2 Auto Activate on Arming Off On
12. Auxiliary 1 Output Momentary 10 seconds Timed Latched
13. Auxiliary 2 Output Momentary 10 seconds Timed Latched
14. Trunk Disarm Feature Off On
15. Remote Start in Valet Mode (optional) Enabled Disabled
16. Lock With Remote Start On Off
17. Lock With Remote Shutdown On Off
18. Engine Run Time 12 minutes 24 minutes
19. Cold Temperature Starting Every 2 hours Every hour
20. Engine Start Sense Smart Start Tach Start
21. Engine Programming Learn RPM Gas Engine Diesel Engine
22. FM Module Program (optional) Learn Module Learn FM Transmitter
23. Ignition 2 Relay Programming Ignition 2 Accessory 2 Starter 2
24. Horn Output Horn Output Ignition 3 Output
Entering Programming
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press valet switch 5
times.
• The siren will chirp 3 times, indicating
that you have entered Programming.
3. Press the valet switch the number times
equal to the Feature you want to change.
• The siren will chirp each time the valet
switch is pressed.
4. Within 5 seconds, press the transmitter
button corresponding to the desired oper-
ating mode for that Feature.
• The siren will chirp to indicate the set-
ting.
One chirp = Button 1
Two chirps = Button 2
Three chirps = Button 3
5. Repeat steps 3 and 4 to change additional
features.
6. Turn off ignition to save changes.
Note: The optional FM transmitter may not be
used for feature programming.