!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially
as noted in these instruc-
tions. Wear protective
gloves if necessary.
!
WA R N I N G
The use of alcohol, prescrip-
tion or non-prescription
drugs may impair the
consumer’s ability to prop-
erly assemble or safely
operate the appliance.
!
C AU T I O N
Two people are recom-
mended for the assembly
of this product.
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling
Find a large, clean area to assemble your griddle. Please refer to the parts list
and assembly diagrams as necessary.
Griddle assembly involves large components; therefore,
it is advised to
have two people assemble the unit.
STEP 01
Place griddle on a
smooth flat surface and attach the
four (4) griddle feet and the four(4)
M8 flange nuts to the bottom of
the griddle in the pre-threaded
holes. Ensure that the fuel nozzle is
housed within the burner opening.
STEP 04
Attach the side shelf by sliding the tear-shaped holes over the
pre-inserted screws on the right side of the griddle stand. Push the shelf
down to lock it into place.
STEP 05
Place the griddle on the stand. The four (4) feet on the bottom of
the griddle will line up with the corresponding holes for secure placement.
TOOLS NEEDED:
Phillips Head
Screwdriver & Adjustable Wrench
STEP 02
Remove the griddle
stand from the packaging and open
the stand legs. Once the legs are
fully open, the locking pins will
engage. (To close the legs, pull on
the locking pins to disengage them.)
STEP 03
Adjust the legs to
desired height and turn the thumb-
screws to tighten.
Model 1891
| Owner’s Manual |
| Owner’s Manual |
Model 1891
08
09
Assembly Guide
Assembly Guide
