Black Mountain Hutto, Руководство пользователя

Страница: 22 / 49

www.blackmountain.bike
WARNING: Having re-attached the V-brakes, always test the brakes by
actioning both left and right brake levers, ensuring the wheels can be fully braked.
If brakes are not re-attached properly, it can lead to injury or death.
WARNING: You will find the wheel bolts* needed for the front wheel in a packet
in the VIP box. Please ensure you install them on each side as shown above.
Failure to do so can result in serious injury or death. More detailed information is
available on our website. Please contact us with any questions.
SETTING UP: FITTING THE FRONT WHEEL - DISC BRAKE
Ensure that the disc rotor is lined up with the gap between the
disc pads. When moving on to step 02 (previous page) ensure that
the disc smoothly slots in to the caliper
You can ignore step 04 on the previous page.
Instead, after the wheel bolts* are tightened, ensure the wheel
spins freely and the brake lever pulls and releases smoothly
It is not unusual to have some disc rub when the bike is new and
before the pads have "bedded in."
01A
Mountain bike disc brakes provide unrivaled stopping power in all conditions, however
it's important to "bed in" new pads and discs in order to bring them up to full power. To
do this, ride at a fast walking pace and brake hard a few times. You should feel the brakes
improve with each attempt until the rear wheel locks and skids. Be careful when stopping
hard using the front brake!
Oil or grease on the disc brake rotor or pads will greatly reduce the brake effectiveness
or cause brake noise/squeal. Ensure that your hands are clean and grease-free when
working with or handling disc brakes.
TAKE CARE WHEN
HANDLING DISC
BRAKE ROTORS
(refer to
warnings on page 41)
*Some models/territories use bolt-on skewers or quick-release skewers instead of wheel
bolts. Please see documentation supplied with the skewers for installation instructions
and safety warnings.
* WARNING: Some models/territories use bolt-on skewers or quick-release
skewers instead of wheel bolts. Failure to properly install wheel skewers can lead
to injury or death. Refer to skewer installation documentation
23
Kapel_Hutto_Manual OCT2019ALv3.indd 23 28/11/2019 14:13