Black Mountain Hutto, Руководство пользователя

Страница: 21 / 49

© Black Mountain Bikes
SETTING UP: FITTING THE FRONT WHEEL
Insert the wheel bolts* (you'll find them in the
VIP box) either side of the wheel and leave
enough space for the wheel to slot into the
forks. For disc brakes, see the additional step
01A on the next page. Place the front wheel between the forks, being
careful to position it to rotate in the correct
direction. If you look on the side of the tyre, you
will see an arrow to indicate this direction. Make
sure that the wheel is centered evenly in the fork.
Now using the 5mm hex key tighten up the
wheel bolts* to 8Nm (5.9ft-lb) torque on each
side, checking that the wheel is evenly spaced
between the forks. V-BRAKE MODELS ONLY. Now reattach the brake
- squeeze the brake arms together and replace the
‘noodle’ into the noodle holder (cable bridge).
02
04 03
TO DO THIS YOU WILL NEED THE 5MM HEX KEY
CABLE BRIDGE
MAKE SURE WHEEL IS FULLY &
EVENLY SEATED IN THE FORK
01
FRONT WHEEL BOLTS*
are in the VIP box, in a
small brown envelope.
If the brakes rub, see Page 37
for troubleshooting.
NOODLE
*Some models/territories use skewers instead of wheel bolts.
Refer to documentation & warnings supplied with the skewers.
22
Kapel_Hutto_Manual OCT2019ALv3.indd 22 28/11/2019 14:13