SPACE WALKER -
ITEM CODE: BH65
.
Instruction Manual
4
C/A glue
Bottom side
Bottom side
C/A glue
2. Using a modeling knife, remove the cov-
ering servo tray.
Bottom side
C/A glue
Bottom side
Bottom side
Remove covering
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Thread
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Secure
Servo tray
