SPACE WALKER -
ITEM CODE: BH65
.
Instruction Manual
18
Drill a hole
6 mm diameter.
6. After the epoxy has fully cured, remove
the masking tape or T-pins used to hold the
stabilizer in place and carefully inspect the
glue joints. Use more epoxy to fill in any
gaps that were not filled previously and
clean up the excess using a paper towel and
rubbing alcohol.
Bottom side
C/A glue
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
ELEVATOR CONTROL HORN INSTALLA-
TION.
Nilon control clasp.
M3 lock nut.
3x35mm.
