SPACE WALKER -
ITEM CODE: BH65
.
INSTRUCTION MANUAL
7
6. Insert the 90 degree bend down through
the hole in the servo arm. Install one nylon
snap keeper over the wire to secure it to the
arm. Install the servo arm retaining screw and
remove the masking tape from the aileron.
Bottom side
Bottom side
Repeat the procedure for the other wing
half
.
Top side
Top side
JOINING THE WING HALVES.
1. Locate the aluminium wing dihedral
brace.
2. Using a modeling knife, remove the cov-
ering wing.
3. Test fit the dihedral brace into each wing
half. The brace should slide in easily.
Remove covering
Top side
Epoxy glue
Bottom side
Bottom side
