14
SEA FURY Item code: BH148
.
Instruction Manual
Repeat the procedure for the other wing half.
XIV. INSTALLING COCKPIT
FUSELAGE
Insert the wing panel as pictures below.
Screw the wing panel in position.
Position the canopy so the rear frame on the canopy is
aligned with the rear edge of the cockpit opening. Use
canopy glue to secure the canopy to the canopy hatch.
Use low-tack tape to hold the canopy in position until
the glue fully cures. Wrap the tape completely around
the canopy hatch, as the tape does not stick well to
the covering. We used balsa sticks to hold the lower
edges of the canopy tightly against the canopy hatch.
Install the spinner backplate, propeller and spinner
cone. The spinner cone is held in place using two 3mm
x 8 mm machine screws.
XV. INSTALLING THE SPINNER
Secure
Secure
Close and
Open
Push in
Push in
Push in
A/B Epoxy glue.
Pillot
Push in