5
PZL-104 Wilga
- Item code: BH 124
.
Instruction Manual
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Secure.
Thread.
Electric
wire.
Servo tray.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Secure.
Repeat the procedure for the other wing
half
.
Aileron
control horn
Install aileron control horn as same
as picture below.
2.INSTALLING THE AILERON CONTROL
HORN.
