PITTS
Item code: BH85-A
Instruction Manual
15
XII. INSTALLING COCKPIT
FUSELAGE
2. Push in
A/B Epoxy glue.
Pillot
Installing the fuselage hatch as same as picture
below.
Position the canopy so the rear frame on the
canopy is aligned with the rear edge of the cockpit
opening. Use canopy glue to secure the canopy
to the canopy hatch. Use low-tack tape to hold the
canopy in position until the glue fully cures. Wrap
the tape completely around the canopy hatch, as
the tape does not stick well to the covering. We
used balsa sticks to hold the lower edges of the
canopy tightly against the canopy hatch.
Please see pictures below.
Open and Close
