P-47 THUNDERBOLT-EP-
Item code: BH118
.
Instruction Manual
16
1) Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
2) Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
Receiver
Tie wrap.
4) Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
C/A glue.
3) Do not permanently secure the re-
ceiver and battery until after balancing the
model.
Battery
Tie wrap.
Battery
Top side.
Содержание P- 47 THUNDERBOLT- EP
Страница 8: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 8 2 x12mm Secure Secure...
Страница 10: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 10 C A glue 3x 15mm Secure Secure Epoxy glue...
Страница 12: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 12 Epoxy glue Epoxy glue Epoxy glue Epoxy glue C A glue...