P-47 THUNDERBOLT-EP-
Item code: BH118
.
Instruction Manual
6
Repeat the procedure for the other wing
half
.
4. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
3. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Electric wire
Secure.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Secure.
Bottom side
2.INSTALLING THE AILERON
CONTROL HORN.
Straight line.
Install aileron control horn as same as
picture below.
Control horn
aileron.
Содержание P- 47 THUNDERBOLT- EP
Страница 8: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 8 2 x12mm Secure Secure...
Страница 10: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 10 C A glue 3x 15mm Secure Secure Epoxy glue...
Страница 12: ...P 47 THUNDERBOLT EP Item code BH118 Instruction Manual 12 Epoxy glue Epoxy glue Epoxy glue Epoxy glue C A glue...