Black Horse Model Focke-Wulf FW190A, Инструкция по эксплуатации

Страница: 6 / 34

Focke-Wulf FW190A-
Item code:BH87 INSTRUCTION MANUAL.
6
Thread
Electric wire
2.INSTALLING THE AILERON CONTROL HORN.
Secure.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
†
5. Instal servo tray with aileron servo into
the wing as same as picture below.
M3 lock nut.
3mm x 50mm.
Nilon control clasp
.
2x10mm.
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Servo tray.
Remove covering