27
Focke-Wulf FW190A-
Item code:BH87
INSTRUCTION MANUAL.
Secure
Rudder Control horn.
M2 lock nut.
Cut.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
3x12mm
MOUNTING THE TAIL WHEEL
BRACKET.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
Содержание Focke-Wulf FW190A
Страница 10: ...Focke Wulf FW190A Item code BH87 INSTRUCTION MANUAL 10 BH 87 AR ...
Страница 11: ...11 Focke Wulf FW190A Item code BH87 INSTRUCTION MANUAL Secure Lock nut 3 x 10 mm 3 x 16 mm Secure ...
Страница 13: ...13 Focke Wulf FW190A Item code BH87 INSTRUCTION MANUAL FUSELAGE CANOPY AND PILOT C A glue C A glue Epoxy glue ...
Страница 32: ...Focke Wulf FW190A Item code BH87 INSTRUCTION MANUAL 32 Wing bolt secure Mark point C A glue Mark point ...